A portable, non-invasive spot check of oxygen saturation and pulse rate designed for Finger size range: 0.3" - 1.0", our Drive Medical Pediatric Fingertip Pulse Oximeter is easy to use and has a child friendly design.

Features for the Drive Medical Pediatric Pulse Oximeter - Fingertip

• Four-way OLED with six display modes
• Portable, non-invasive spot check of oxygen saturation and pulse rate
• Uses two AAA batteries
• Low battery indicator
• Comes in retail box
• auto-off feature
• Lanyard, silicon case, and hang bag included
• Adjustable brightness levels from 1 - 10
• Finger size range: 0.3" - 1.0"

Model No. 18707

1. Display Type: OLED display

2. SpO2

Display range: 0%~99%

Measurement range: 70%~99%

Accuracy: 70%~99%: ±3%; 0%~69% no definition

Resolution: 1%

3. Pulse Rate

Display range: 0bpm~254bpm

Measure range: 30bpm~235bpm

Accuracy: 30bpm~99bpm, ±2bpm; 100bpm~235bpm, ±2%

Resolution: 1bpm

4. Probe LED Specifications

Operation Instructions for Drive Medical Pediatric Fingertip Pulse Oximeter

1. Install two AAA batteries according to the Battery Installation instructions.
2. Place one of your fingers into the rubber opening of the pulse oximeter.
3. Press the switch button one time on front panel to turn the pulse oximeter on.
4. Keep your hands still for the reading. Do not shake your finger during the test. It is recommended that you do not move your body while taking a reading.
5. Read the data from the display screen

Maintenance and Storage for Drive Medical Pediatric Pulse Oximeter - Fingertip 

1. Replace the batteries in a timely manner when low voltage lamp is lighted. 2. Clean surface of the fingertip oximeter before it is used in diagnosis for patients.
2. Remove the batteries if the oximeter is not operated for a long time.
3. It is best to store the product in -20°C to 55°C and ≤93% humidity.
4. Keep in a dry place. Extreme moisture may affect oximeter lifetime and may cause damage.
5. Dispose of battery properly; follow any applicable local battery disposal laws.

Cleaning the fingertip pulse oximeter

Please use medical alcohol to clean the silicone touching the finger inside of Oximeter with a soft cloth dampened with 70% isopropyl alcohol. Also clean the being tested finger using alcohol before and after each test. Do not pour or spray liquids onto the oximeter, and do not allow any liquid to enter any openings in the device. Allow the oximeter to dry thoroughly before reuse.